Close

Dell Technologies IoT Solution | Surveillance

Close

S4000 Series (S4048-ON)

  • 48 dual-speed 1/10GbE (SFP+) ports and six 40GbE (QSFP+) uplinks (totaling 72 10GbE ports with breakout cables) with OS support
  • 44Tbps (full-duplex) non-blocking switching fabric delivers line-rate performance under full load with sub 600ns latency
  • I/O panel to PSU airflow or PSU to I/O panel airflow
  • Supports the open source ONIE for zero-touch installation of alternate network operating systems
  • Redundant, hot-swappable power supplies and fans
  • Low power consumption
  • Support for multi-tenancy like VXLAN and NVGRE in hardware
  • Gateway
  • User port stacking support for up to six units managed as one logical device
  • Embedded Open Automation Framework adds VM awareness automated configuration and provisioning capabilities to simplify the management of virtual network environments
Tech Specs
FunctionalityS4048-ON

Line-rate ports

48 x 10GbE SFP+ ports or 72 10GbE ports with breakout cables

40GbE ports

6 x 40GbE QSFP+ ports

Size

1RU, 1.71 h x 17.09 w x 17.13" d (4.35 h x 43.4 w x 46 cm d)

Weight

18.52 lbs (8.4 kg)

Power supply

100 - 240 VAC 50/60 Hz

Switch I/O bandwidth

1.44 Tbps

Forwarding rate

1080 Mpps

Switching latency

sub 600ns

Packet buffer memory

12MB

CPU memory

2GB

Redundancy

Hot swappable redundant power
Hot swappable redundant fans

Safety

UL/CSA 60950-L Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition Including all National Deviations and Group Differences, EN 60825-1 Safety of Laser Products Part1: Equipment Classification Requirements and User’s Guide, EN 60825-2 Safety of Laser Products Part 2: Safety of Optical Fibre Communications Systems, FDA Regulation 21 CFR 1040.10 and 1040.11

Emissions

Australia/New Zealand: ASNZS CISPR 22: 2006,m Class A, Canada: ICES-003, Issue-4, Class A, Europe: EN 55022: 2006+A1:2007 (CISPR 22: 2006), Class A, Japan: VCCI V3/2009 Class A

Immunity

EN300 386 V1.4.1:2008 EMC for Network Equipment, EN 55024: 1988 + A1: 2001 + A2: 2003, EN 61000-3-2: Harmonic Current Emissions, EN 61000-3-3: Voltage Fluctuations and Flicker, EN61000-4-2: ESD, EN 61000-4-3: Radiated Immunity, EN 61000-4-4: EFT, EN 61000-4-5: Surge, EN 61000-4-6: Low Frequency Conducted Immunity

RoHS

All S Series components are EU RoHS compliant

Close
Close

S4000 Series (S4048-ON)

  • 48 dual-speed 1/10GbE (SFP+) ports and six 40GbE (QSFP+) uplinks (totaling 72 10GbE ports with breakout cables) with OS support
  • 44Tbps (full-duplex) non-blocking switching fabric delivers line-rate performance under full load with sub 600ns latency
  • I/O panel to PSU airflow or PSU to I/O panel airflow
  • Supports the open source ONIE for zero-touch installation of alternate network operating systems
  • Redundant, hot-swappable power supplies and fans
  • Low power consumption
  • Support for multi-tenancy like VXLAN and NVGRE in hardware
  • Gateway
  • User port stacking support for up to six units managed as one logical device
  • Embedded Open Automation Framework adds VM awareness automated configuration and provisioning capabilities to simplify the management of virtual network environments
Tech Specs
FunctionalityS4048-ON

Line-rate ports

48 x 10GbE SFP+ ports or 72 10GbE ports with breakout cables

40GbE ports

6 x 40GbE QSFP+ ports

Size

1RU, 1.71 h x 17.09 w x 17.13" d (4.35 h x 43.4 w x 46 cm d)

Weight

18.52 lbs (8.4 kg)

Power supply

100 - 240 VAC 50/60 Hz

Switch I/O bandwidth

1.44 Tbps

Forwarding rate

1080 Mpps

Switching latency

sub 600ns

Packet buffer memory

12MB

CPU memory

2GB

Redundancy

Hot swappable redundant power
Hot swappable redundant fans

Safety

UL/CSA 60950-L Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition Including all National Deviations and Group Differences, EN 60825-1 Safety of Laser Products Part1: Equipment Classification Requirements and User’s Guide, EN 60825-2 Safety of Laser Products Part 2: Safety of Optical Fibre Communications Systems, FDA Regulation 21 CFR 1040.10 and 1040.11

Emissions

Australia/New Zealand: ASNZS CISPR 22: 2006,m Class A, Canada: ICES-003, Issue-4, Class A, Europe: EN 55022: 2006+A1:2007 (CISPR 22: 2006), Class A, Japan: VCCI V3/2009 Class A

Immunity

EN300 386 V1.4.1:2008 EMC for Network Equipment, EN 55024: 1988 + A1: 2001 + A2: 2003, EN 61000-3-2: Harmonic Current Emissions, EN 61000-3-3: Voltage Fluctuations and Flicker, EN61000-4-2: ESD, EN 61000-4-3: Radiated Immunity, EN 61000-4-4: EFT, EN 61000-4-5: Surge, EN 61000-4-6: Low Frequency Conducted Immunity

RoHS

All S Series components are EU RoHS compliant

Close
Close

PowerEdge R440

Highlights

  • Highly optimized air flow design enables tremendous configuration flexibility and industry-leading energy efficiency
  • Out of band management architecture facilitates rapid bare metal deployment and remediation regardless of OS state
  • Embedded SupportAssist reduces troubleshooting and downtime with embedded diagnostics and automated case creation

Automate Productivity

  • Get up to 4x performance increase for common management tasks with iDRAC9’s new dual-core ARM processor (compared with iDRAC8)
  • Use the same next-generation of embedded automation to standardize BIOS and secure boot configuration, firmware updates, server asset inventory, health monitoring, and power/reset control across all PowerEdge servers
  • Proactive automated support embedded resolves issues up to 90% faster

Comprehensive Security

  • Fully signed firmware updates; embedded trust only allows authenticated code to run
  • Security lockdown that protects your server configuration and firmware (BIOS, iDRAC, & RAID) from malicious changes
  • Secure instant erase for HDDs, SSDs, NVMs
  • New, more secure unique default password
  • Redfish, new REST-based management API, is more secure and scalable than legacy IPMI

Feature Description
Processor All-flash: Intel® Xeon® Silver 4114 to Intel Xeon Gold 5118; Hybrid: Intel Xeon Silver 4114
Memory 192GB to 384GB
Storage All-flash: 7.68TB to 30.72TB NVMe 32TB (Max); Hybrid: 3.68TB to 16TB
Network On‑board dual port and dual port network daughter card
Close

PowerEdge R440

Highlights

  • Highly optimized air flow design enables tremendous configuration flexibility and industry-leading energy efficiency
  • Out of band management architecture facilitates rapid bare metal deployment and remediation regardless of OS state
  • Embedded SupportAssist reduces troubleshooting and downtime with embedded diagnostics and automated case creation

Automate Productivity

  • Get up to 4x performance increase for common management tasks with iDRAC9’s new dual-core ARM processor (compared with iDRAC8)
  • Use the same next-generation of embedded automation to standardize BIOS and secure boot configuration, firmware updates, server asset inventory, health monitoring, and power/reset control across all PowerEdge servers
  • Proactive automated support embedded resolves issues up to 90% faster

Comprehensive Security

  • Fully signed firmware updates; embedded trust only allows authenticated code to run
  • Security lockdown that protects your server configuration and firmware (BIOS, iDRAC, & RAID) from malicious changes
  • Secure instant erase for HDDs, SSDs, NVMs
  • New, more secure unique default password
  • Redfish, new REST-based management API, is more secure and scalable than legacy IPMI

Feature Description
Processor All-flash: Intel® Xeon® Silver 4114 to Intel Xeon Gold 5118; Hybrid: Intel Xeon Silver 4114
Memory 192GB to 384GB
Storage All-flash: 7.68TB to 30.72TB NVMe 32TB (Max); Hybrid: 3.68TB to 16TB
Network On‑board dual port and dual port network daughter card
Close

PowerEdge R440

Highlights

  • Highly optimized air flow design enables tremendous configuration flexibility and industry-leading energy efficiency
  • Out of band management architecture facilitates rapid bare metal deployment and remediation regardless of OS state
  • Embedded SupportAssist reduces troubleshooting and downtime with embedded diagnostics and automated case creation

Automate Productivity

  • Get up to 4x performance increase for common management tasks with iDRAC9’s new dual-core ARM processor (compared with iDRAC8)
  • Use the same next-generation of embedded automation to standardize BIOS and secure boot configuration, firmware updates, server asset inventory, health monitoring, and power/reset control across all PowerEdge servers
  • Proactive automated support embedded resolves issues up to 90% faster

Comprehensive Security

  • Fully signed firmware updates; embedded trust only allows authenticated code to run
  • Security lockdown that protects your server configuration and firmware (BIOS, iDRAC, & RAID) from malicious changes
  • Secure instant erase for HDDs, SSDs, NVMs
  • New, more secure unique default password
  • Redfish, new REST-based management API, is more secure and scalable than legacy IPMI

Feature Description
Processor All-flash: Intel® Xeon® Silver 4114 to Intel Xeon Gold 5118; Hybrid: Intel Xeon Silver 4114
Memory 192GB to 384GB
Storage All-flash: 7.68TB to 30.72TB NVMe 32TB (Max); Hybrid: 3.68TB to 16TB
Network On‑board dual port and dual port network daughter card
Close

PowerEdge R740xd

Highlights

  • Uncompromising storage performance and data set processing in a 2U/2S form factor
  • Highly optimized air flow design  enabling tremendous configuration flexibility and industry leading energy efficiency
  • Optimized for SDS with flexible configurations based on your specific storage, compute and I/O requirements
  • Out of band management architecture facilitating rapid bare metal deployment and remediation regardless of OS state
  • Embedded SupportAssist reducing troubleshooting and downtime with embedded diagnostics and automated case creation

Automate Productivity

  • Get up to 4x performance improvement with common management tasks with iDRAC9’s new dual-core ARM processor (compared with iDRAC8)
  • Use the same next-generation of embedded automation to standardize BIOS and secure boot configuration, firmware updates, server asset inventory, health monitoring, and power/reset control across all PowerEdge servers
  • Proactive automated support embedded resolves issues up to 90% faster

Comprehensive Security

  • Fully signed firmware updates; embedded trust only allows authenticated code to run
  • Security lockdown that protects your server configuration and firmware (BIOS, iDRAC, & RAID) from malicious changes
  • Secure instant erase for HDDs, SSDs, NVMs
  • New, more secure unique default password
  • Redfish, new REST-based management API, is more secure and scalable than legacy IPMI

Tech Specs
Feature Description
Processor Intel Xeon Gold 6126
Memory 192GB to 384GB
Storage All-flash: 38.4TB to 80.6TB NVMe SSD 204.8TB (Max); Hybrid: 8.4TB to 25.2TB
Network Dual port networking (daughter card and addin card)
PowerEdge R730xd technical specification

Form factor

2U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family

Cache

2.5MB per core
Up to 22 cores

Chipset Intel

Intel C610 series chipset

Memory

Up to 1.5TB (24 DIMM slots): 4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s

I/O slots

Up to 6 x PCIe 3.0 plus dedicated PERC slot

RAID controllers

Internal controllers: PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Drive bays

Internal hard drive bay and hot-plug backplane:
Up to 16 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 2 x 2.5” drives
Up to 18 x 1.8” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 8 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 2 x 2.5” drives
Up to 26 x 2.5” + 2 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD), PCIe SSD drives

Maximum internal storage

Up to 81TB using 18 x 1.8” 960GB SATA SSD + 8 x 3.5” SATA or NL-SAS HDD
Up to 46.8TB using 24 x 2.5” 1.8TB SAS HDD + 2 x 2.5” 1.8TB SAS HDD
Up to 131.6TB using 12 x 3.5" 8TB NL-SAS HDD + 4 x 3.5" 8TB NL-SAS + 2 x 2.5" 1.8TB SAS HDD or SSD

Embedded NIC

4 x 1GbE, 2 x 10+2GbE, 4 x 10GbE NDC

Power supplies

Titanium* efficiency 750W AC power supply; 1100W DC power supply; Platinum* efficiency 495W, 750W, 1100W AC power supply

Availability

ECC memory, hot-plug hard drives, hot-plug redundant cooling, hot-plug redundant power, internal dual SD module, single device data correction (SDDC), spare rank, tool-less chassis, support for high availability clustering and virtualization, proactive systems management alerts, iDRAC8 with Lifecycle Controller

Systems management

Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile
Dell OpenManage Power Center
Remote management:
DRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade)
8GB vFlash media (upgrade)
16GB vFlash media (upgrade)
iDRAC Quick Sync
Dell OpenManage Integrations:
Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Integration for VMware® vCenter™
Dell OpenManage Connections:
HP Operations Manager
IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Operating systems

Microsoft Windows Server® 2008/2012 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008/2012 R2, x64 (includes Hyper-V)
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™

Dimensions

H: 8.73 cm (3.44 in.) x W: 44.40 cm (17.49 in.) x D: 68.40 cm (26.92 in.)

Recommended support

Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. Consulting and deployment offerings are also available. Contact your Dell representative today for more information. Availability and terms of Dell Services vary by region.

*80 PLUS certification
Close
Close

PowerEdge R740xd

Highlights

  • Uncompromising storage performance and data set processing in a 2U/2S form factor
  • Highly optimized air flow design  enabling tremendous configuration flexibility and industry leading energy efficiency
  • Optimized for SDS with flexible configurations based on your specific storage, compute and I/O requirements
  • Out of band management architecture facilitating rapid bare metal deployment and remediation regardless of OS state
  • Embedded SupportAssist reducing troubleshooting and downtime with embedded diagnostics and automated case creation

Automate Productivity

  • Get up to 4x performance improvement with common management tasks with iDRAC9’s new dual-core ARM processor (compared with iDRAC8)
  • Use the same next-generation of embedded automation to standardize BIOS and secure boot configuration, firmware updates, server asset inventory, health monitoring, and power/reset control across all PowerEdge servers
  • Proactive automated support embedded resolves issues up to 90% faster

Comprehensive Security

  • Fully signed firmware updates; embedded trust only allows authenticated code to run
  • Security lockdown that protects your server configuration and firmware (BIOS, iDRAC, & RAID) from malicious changes
  • Secure instant erase for HDDs, SSDs, NVMs
  • New, more secure unique default password
  • Redfish, new REST-based management API, is more secure and scalable than legacy IPMI

Tech Specs
Feature Description
Processor Intel Xeon Gold 6126
Memory 192GB to 384GB
Storage All-flash: 38.4TB to 80.6TB NVMe SSD 204.8TB (Max); Hybrid: 8.4TB to 25.2TB
Network Dual port networking (daughter card and addin card)
PowerEdge R730xd technical specification

Form factor

2U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family

Cache

2.5MB per core
Up to 22 cores

Chipset Intel

Intel C610 series chipset

Memory

Up to 1.5TB (24 DIMM slots): 4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s

I/O slots

Up to 6 x PCIe 3.0 plus dedicated PERC slot

RAID controllers

Internal controllers: PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Drive bays

Internal hard drive bay and hot-plug backplane:
Up to 16 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 2 x 2.5” drives
Up to 18 x 1.8” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 8 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 2 x 2.5” drives
Up to 26 x 2.5” + 2 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD), PCIe SSD drives

Maximum internal storage

Up to 81TB using 18 x 1.8” 960GB SATA SSD + 8 x 3.5” SATA or NL-SAS HDD
Up to 46.8TB using 24 x 2.5” 1.8TB SAS HDD + 2 x 2.5” 1.8TB SAS HDD
Up to 131.6TB using 12 x 3.5" 8TB NL-SAS HDD + 4 x 3.5" 8TB NL-SAS + 2 x 2.5" 1.8TB SAS HDD or SSD

Embedded NIC

4 x 1GbE, 2 x 10+2GbE, 4 x 10GbE NDC

Power supplies

Titanium* efficiency 750W AC power supply; 1100W DC power supply; Platinum* efficiency 495W, 750W, 1100W AC power supply

Availability

ECC memory, hot-plug hard drives, hot-plug redundant cooling, hot-plug redundant power, internal dual SD module, single device data correction (SDDC), spare rank, tool-less chassis, support for high availability clustering and virtualization, proactive systems management alerts, iDRAC8 with Lifecycle Controller

Systems management

Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile
Dell OpenManage Power Center
Remote management:
DRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade)
8GB vFlash media (upgrade)
16GB vFlash media (upgrade)
iDRAC Quick Sync
Dell OpenManage Integrations:
Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Integration for VMware® vCenter™
Dell OpenManage Connections:
HP Operations Manager
IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Operating systems

Microsoft Windows Server® 2008/2012 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008/2012 R2, x64 (includes Hyper-V)
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™

Dimensions

H: 8.73 cm (3.44 in.) x W: 44.40 cm (17.49 in.) x D: 68.40 cm (26.92 in.)

Recommended support

Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. Consulting and deployment offerings are also available. Contact your Dell representative today for more information. Availability and terms of Dell Services vary by region.

*80 PLUS certification
Close
Close

PowerEdge R740xd

Highlights

  • Uncompromising storage performance and data set processing in a 2U/2S form factor
  • Highly optimized air flow design  enabling tremendous configuration flexibility and industry leading energy efficiency
  • Optimized for SDS with flexible configurations based on your specific storage, compute and I/O requirements
  • Out of band management architecture facilitating rapid bare metal deployment and remediation regardless of OS state
  • Embedded SupportAssist reducing troubleshooting and downtime with embedded diagnostics and automated case creation

Automate Productivity

  • Get up to 4x performance improvement with common management tasks with iDRAC9’s new dual-core ARM processor (compared with iDRAC8)
  • Use the same next-generation of embedded automation to standardize BIOS and secure boot configuration, firmware updates, server asset inventory, health monitoring, and power/reset control across all PowerEdge servers
  • Proactive automated support embedded resolves issues up to 90% faster

Comprehensive Security

  • Fully signed firmware updates; embedded trust only allows authenticated code to run
  • Security lockdown that protects your server configuration and firmware (BIOS, iDRAC, & RAID) from malicious changes
  • Secure instant erase for HDDs, SSDs, NVMs
  • New, more secure unique default password
  • Redfish, new REST-based management API, is more secure and scalable than legacy IPMI

Tech Specs
Feature Description
Processor Intel Xeon Gold 6126
Memory 192GB to 384GB
Storage All-flash: 38.4TB to 80.6TB NVMe SSD 204.8TB (Max); Hybrid: 8.4TB to 25.2TB
Network Dual port networking (daughter card and addin card)
PowerEdge R730xd technical specification

Form factor

2U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family

Cache

2.5MB per core
Up to 22 cores

Chipset Intel

Intel C610 series chipset

Memory

Up to 1.5TB (24 DIMM slots): 4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s

I/O slots

Up to 6 x PCIe 3.0 plus dedicated PERC slot

RAID controllers

Internal controllers: PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Drive bays

Internal hard drive bay and hot-plug backplane:
Up to 16 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 2 x 2.5” drives
Up to 18 x 1.8” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 8 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 2 x 2.5” drives
Up to 26 x 2.5” + 2 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD), PCIe SSD drives

Maximum internal storage

Up to 81TB using 18 x 1.8” 960GB SATA SSD + 8 x 3.5” SATA or NL-SAS HDD
Up to 46.8TB using 24 x 2.5” 1.8TB SAS HDD + 2 x 2.5” 1.8TB SAS HDD
Up to 131.6TB using 12 x 3.5" 8TB NL-SAS HDD + 4 x 3.5" 8TB NL-SAS + 2 x 2.5" 1.8TB SAS HDD or SSD

Embedded NIC

4 x 1GbE, 2 x 10+2GbE, 4 x 10GbE NDC

Power supplies

Titanium* efficiency 750W AC power supply; 1100W DC power supply; Platinum* efficiency 495W, 750W, 1100W AC power supply

Availability

ECC memory, hot-plug hard drives, hot-plug redundant cooling, hot-plug redundant power, internal dual SD module, single device data correction (SDDC), spare rank, tool-less chassis, support for high availability clustering and virtualization, proactive systems management alerts, iDRAC8 with Lifecycle Controller

Systems management

Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile
Dell OpenManage Power Center
Remote management:
DRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade)
8GB vFlash media (upgrade)
16GB vFlash media (upgrade)
iDRAC Quick Sync
Dell OpenManage Integrations:
Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Integration for VMware® vCenter™
Dell OpenManage Connections:
HP Operations Manager
IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Operating systems

Microsoft Windows Server® 2008/2012 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008/2012 R2, x64 (includes Hyper-V)
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™

Dimensions

H: 8.73 cm (3.44 in.) x W: 44.40 cm (17.49 in.) x D: 68.40 cm (26.92 in.)

Recommended support

Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. Consulting and deployment offerings are also available. Contact your Dell representative today for more information. Availability and terms of Dell Services vary by region.

*80 PLUS certification
Close
Close

PowerEdge R740xd

Highlights

  • Uncompromising storage performance and data set processing in a 2U/2S form factor
  • Highly optimized air flow design  enabling tremendous configuration flexibility and industry leading energy efficiency
  • Optimized for SDS with flexible configurations based on your specific storage, compute and I/O requirements
  • Out of band management architecture facilitating rapid bare metal deployment and remediation regardless of OS state
  • Embedded SupportAssist reducing troubleshooting and downtime with embedded diagnostics and automated case creation

Automate Productivity

  • Get up to 4x performance improvement with common management tasks with iDRAC9’s new dual-core ARM processor (compared with iDRAC8)
  • Use the same next-generation of embedded automation to standardize BIOS and secure boot configuration, firmware updates, server asset inventory, health monitoring, and power/reset control across all PowerEdge servers
  • Proactive automated support embedded resolves issues up to 90% faster

Comprehensive Security

  • Fully signed firmware updates; embedded trust only allows authenticated code to run
  • Security lockdown that protects your server configuration and firmware (BIOS, iDRAC, & RAID) from malicious changes
  • Secure instant erase for HDDs, SSDs, NVMs
  • New, more secure unique default password
  • Redfish, new REST-based management API, is more secure and scalable than legacy IPMI

Tech Specs
Feature Description
Processor Intel Xeon Gold 6126
Memory 192GB to 384GB
Storage All-flash: 38.4TB to 80.6TB NVMe SSD 204.8TB (Max); Hybrid: 8.4TB to 25.2TB
Network Dual port networking (daughter card and addin card)
PowerEdge R730xd technical specification

Form factor

2U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family

Cache

2.5MB per core
Up to 22 cores

Chipset Intel

Intel C610 series chipset

Memory

Up to 1.5TB (24 DIMM slots): 4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s

I/O slots

Up to 6 x PCIe 3.0 plus dedicated PERC slot

RAID controllers

Internal controllers: PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Drive bays

Internal hard drive bay and hot-plug backplane:
Up to 16 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 2 x 2.5” drives
Up to 18 x 1.8” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 8 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 2 x 2.5” drives
Up to 26 x 2.5” + 2 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD), PCIe SSD drives

Maximum internal storage

Up to 81TB using 18 x 1.8” 960GB SATA SSD + 8 x 3.5” SATA or NL-SAS HDD
Up to 46.8TB using 24 x 2.5” 1.8TB SAS HDD + 2 x 2.5” 1.8TB SAS HDD
Up to 131.6TB using 12 x 3.5" 8TB NL-SAS HDD + 4 x 3.5" 8TB NL-SAS + 2 x 2.5" 1.8TB SAS HDD or SSD

Embedded NIC

4 x 1GbE, 2 x 10+2GbE, 4 x 10GbE NDC

Power supplies

Titanium* efficiency 750W AC power supply; 1100W DC power supply; Platinum* efficiency 495W, 750W, 1100W AC power supply

Availability

ECC memory, hot-plug hard drives, hot-plug redundant cooling, hot-plug redundant power, internal dual SD module, single device data correction (SDDC), spare rank, tool-less chassis, support for high availability clustering and virtualization, proactive systems management alerts, iDRAC8 with Lifecycle Controller

Systems management

Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile
Dell OpenManage Power Center
Remote management:
DRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade)
8GB vFlash media (upgrade)
16GB vFlash media (upgrade)
iDRAC Quick Sync
Dell OpenManage Integrations:
Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Integration for VMware® vCenter™
Dell OpenManage Connections:
HP Operations Manager
IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Operating systems

Microsoft Windows Server® 2008/2012 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008/2012 R2, x64 (includes Hyper-V)
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™

Dimensions

H: 8.73 cm (3.44 in.) x W: 44.40 cm (17.49 in.) x D: 68.40 cm (26.92 in.)

Recommended support

Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. Consulting and deployment offerings are also available. Contact your Dell representative today for more information. Availability and terms of Dell Services vary by region.

*80 PLUS certification
Close
Close

PowerEdge R740xd

Highlights

  • Uncompromising storage performance and data set processing in a 2U/2S form factor
  • Highly optimized air flow design  enabling tremendous configuration flexibility and industry leading energy efficiency
  • Optimized for SDS with flexible configurations based on your specific storage, compute and I/O requirements
  • Out of band management architecture facilitating rapid bare metal deployment and remediation regardless of OS state
  • Embedded SupportAssist reducing troubleshooting and downtime with embedded diagnostics and automated case creation

Automate Productivity

  • Get up to 4x performance improvement with common management tasks with iDRAC9’s new dual-core ARM processor (compared with iDRAC8)
  • Use the same next-generation of embedded automation to standardize BIOS and secure boot configuration, firmware updates, server asset inventory, health monitoring, and power/reset control across all PowerEdge servers
  • Proactive automated support embedded resolves issues up to 90% faster

Comprehensive Security

  • Fully signed firmware updates; embedded trust only allows authenticated code to run
  • Security lockdown that protects your server configuration and firmware (BIOS, iDRAC, & RAID) from malicious changes
  • Secure instant erase for HDDs, SSDs, NVMs
  • New, more secure unique default password
  • Redfish, new REST-based management API, is more secure and scalable than legacy IPMI

Tech Specs
Feature Description
Processor Intel Xeon Gold 6126
Memory 192GB to 384GB
Storage All-flash: 38.4TB to 80.6TB NVMe SSD 204.8TB (Max); Hybrid: 8.4TB to 25.2TB
Network Dual port networking (daughter card and addin card)
PowerEdge R730xd technical specification

Form factor

2U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family

Cache

2.5MB per core
Up to 22 cores

Chipset Intel

Intel C610 series chipset

Memory

Up to 1.5TB (24 DIMM slots): 4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s

I/O slots

Up to 6 x PCIe 3.0 plus dedicated PERC slot

RAID controllers

Internal controllers: PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Drive bays

Internal hard drive bay and hot-plug backplane:
Up to 16 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 2 x 2.5” drives
Up to 18 x 1.8” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 8 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 2 x 2.5” drives
Up to 26 x 2.5” + 2 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD), PCIe SSD drives

Maximum internal storage

Up to 81TB using 18 x 1.8” 960GB SATA SSD + 8 x 3.5” SATA or NL-SAS HDD
Up to 46.8TB using 24 x 2.5” 1.8TB SAS HDD + 2 x 2.5” 1.8TB SAS HDD
Up to 131.6TB using 12 x 3.5" 8TB NL-SAS HDD + 4 x 3.5" 8TB NL-SAS + 2 x 2.5" 1.8TB SAS HDD or SSD

Embedded NIC

4 x 1GbE, 2 x 10+2GbE, 4 x 10GbE NDC

Power supplies

Titanium* efficiency 750W AC power supply; 1100W DC power supply; Platinum* efficiency 495W, 750W, 1100W AC power supply

Availability

ECC memory, hot-plug hard drives, hot-plug redundant cooling, hot-plug redundant power, internal dual SD module, single device data correction (SDDC), spare rank, tool-less chassis, support for high availability clustering and virtualization, proactive systems management alerts, iDRAC8 with Lifecycle Controller

Systems management

Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile
Dell OpenManage Power Center
Remote management:
DRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade)
8GB vFlash media (upgrade)
16GB vFlash media (upgrade)
iDRAC Quick Sync
Dell OpenManage Integrations:
Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Integration for VMware® vCenter™
Dell OpenManage Connections:
HP Operations Manager
IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Operating systems

Microsoft Windows Server® 2008/2012 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008/2012 R2, x64 (includes Hyper-V)
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™

Dimensions

H: 8.73 cm (3.44 in.) x W: 44.40 cm (17.49 in.) x D: 68.40 cm (26.92 in.)

Recommended support

Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. Consulting and deployment offerings are also available. Contact your Dell representative today for more information. Availability and terms of Dell Services vary by region.

*80 PLUS certification
Close
Close

PowerEdge R740xd

Highlights

  • Uncompromising storage performance and data set processing in a 2U/2S form factor
  • Highly optimized air flow design  enabling tremendous configuration flexibility and industry leading energy efficiency
  • Optimized for SDS with flexible configurations based on your specific storage, compute and I/O requirements
  • Out of band management architecture facilitating rapid bare metal deployment and remediation regardless of OS state
  • Embedded SupportAssist reducing troubleshooting and downtime with embedded diagnostics and automated case creation

Automate Productivity

  • Get up to 4x performance improvement with common management tasks with iDRAC9’s new dual-core ARM processor (compared with iDRAC8)
  • Use the same next-generation of embedded automation to standardize BIOS and secure boot configuration, firmware updates, server asset inventory, health monitoring, and power/reset control across all PowerEdge servers
  • Proactive automated support embedded resolves issues up to 90% faster

Comprehensive Security

  • Fully signed firmware updates; embedded trust only allows authenticated code to run
  • Security lockdown that protects your server configuration and firmware (BIOS, iDRAC, & RAID) from malicious changes
  • Secure instant erase for HDDs, SSDs, NVMs
  • New, more secure unique default password
  • Redfish, new REST-based management API, is more secure and scalable than legacy IPMI

Tech Specs
Feature Description
Processor Intel Xeon Gold 6126
Memory 192GB to 384GB
Storage All-flash: 38.4TB to 80.6TB NVMe SSD 204.8TB (Max); Hybrid: 8.4TB to 25.2TB
Network Dual port networking (daughter card and addin card)
PowerEdge R730xd technical specification

Form factor

2U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family

Cache

2.5MB per core
Up to 22 cores

Chipset Intel

Intel C610 series chipset

Memory

Up to 1.5TB (24 DIMM slots): 4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s

I/O slots

Up to 6 x PCIe 3.0 plus dedicated PERC slot

RAID controllers

Internal controllers: PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Drive bays

Internal hard drive bay and hot-plug backplane:
Up to 16 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 2 x 2.5” drives
Up to 18 x 1.8” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 8 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD) + 2 x 2.5” drives
Up to 26 x 2.5” + 2 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD), PCIe SSD drives

Maximum internal storage

Up to 81TB using 18 x 1.8” 960GB SATA SSD + 8 x 3.5” SATA or NL-SAS HDD
Up to 46.8TB using 24 x 2.5” 1.8TB SAS HDD + 2 x 2.5” 1.8TB SAS HDD
Up to 131.6TB using 12 x 3.5" 8TB NL-SAS HDD + 4 x 3.5" 8TB NL-SAS + 2 x 2.5" 1.8TB SAS HDD or SSD

Embedded NIC

4 x 1GbE, 2 x 10+2GbE, 4 x 10GbE NDC

Power supplies

Titanium* efficiency 750W AC power supply; 1100W DC power supply; Platinum* efficiency 495W, 750W, 1100W AC power supply

Availability

ECC memory, hot-plug hard drives, hot-plug redundant cooling, hot-plug redundant power, internal dual SD module, single device data correction (SDDC), spare rank, tool-less chassis, support for high availability clustering and virtualization, proactive systems management alerts, iDRAC8 with Lifecycle Controller

Systems management

Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile
Dell OpenManage Power Center
Remote management:
DRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade)
8GB vFlash media (upgrade)
16GB vFlash media (upgrade)
iDRAC Quick Sync
Dell OpenManage Integrations:
Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Integration for VMware® vCenter™
Dell OpenManage Connections:
HP Operations Manager
IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Operating systems

Microsoft Windows Server® 2008/2012 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008/2012 R2, x64 (includes Hyper-V)
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™

Dimensions

H: 8.73 cm (3.44 in.) x W: 44.40 cm (17.49 in.) x D: 68.40 cm (26.92 in.)

Recommended support

Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. Consulting and deployment offerings are also available. Contact your Dell representative today for more information. Availability and terms of Dell Services vary by region.

*80 PLUS certification
Close

ECS Solutions for Surveillance

Next Generation Private cloud in one global platform

Close

ECS

ECS Appliance Gen-2 U-Series Features

  • Node architecture: Intel x86 servers, JBOD direct-attached storage, up to 60 disks per server
  • 10GbE node network connectivity: 10GbE HA network connectivity with rack, up to 80Gb/s through 10GbE uplinks to customer network
  • Dell EMC 40U rack-based solution: 4- and 8-node configs, HA power
  • Multiple storage configs: unstructured storage up to 3,840TB per rack

ECS Appliance Gen-2 D-Series Features

  • Node architecture: Intel x86 servers, JBOD direct attached storage, up to 98 disk drives per node
  • 10 GbE Node network connectivity: 10GbE HA network connectivity within rack, up to 80Gb/s via 10GbE uplinks to customer network
  • Dell EMC 40U Rack based solution: 8 node configurations, HA Power
  • Multiple Storage Configurations: Unstructured storage up to 7,840TB per rack

Gen-2 U-Series Gen-2 D-Series
Feature Description
Scalable ECS’s software-defined object storage can scale infinitely for both small and large files with strong global consistency. It delivers a globally distributed infrastructure under a single namespace with anywhere access to content.
Flexible ECS can be deployed as an appliance, a software-only solution or a hosted solution, which is an improved consumption choice called ECS Dedicated Cloud Service. It also supports multiple protocols and data streaming capabilities that provide the workload flexibility for customers to pick and choose the best solution.
Enterprise-ready ECS provides customers more control of their data assets with enterprise class object, file and HDFS storage in a secure and compliant system. It also supports features required for Federal workloads, future-proofing storage compliance capabilities.
Cost Effective ECS delivers up to 6048% lower total cost of ownership (TCO) compared to other public cloud storage providers. The new 7.8PB D-series provides a lower TCO than Tape solutions at scale and features a very lower management overhead and small data center footprint.
Intelligent ECS enables real-time data ingestion and analytics that can harvest valuable insights while greatly simplifying the cloud architecture. With ECS, users can search metadata across Exabyte of unstructured data without a dedicated database.
ECS Appliance Gen-2 U-Series Detailed Specifications

ECS-U400

ECS-U400E

ECS-U480E

ECS-U400T

ECS-U2000

ECS-U2800

ECS-U4000

CONFIGURATION

4 Nodes = 4 servers + 4 disk enclosures

5 Nodes = 5 servers + 5 disk enclosures

6 Nodes = 6 servers + 6 disk enclosures

8 Nodes = 8 servers + 8 disk enclosures

8 Nodes = 8 servers + 8 disk enclosures

8 Nodes = 8 servers + 8 disk enclosures

8 Nodes = 8 servers + 8 disk enclosures

DISK RATIO

1:10

1:10

1:10

1:10

1:30

1:45

1:60'

DISK TYPE

8TB 7200

8TB 7200

8TB 7200

8 TB 7200

8TB 7200

8TB 7200

8TB 7200

RAW CAPACITY

320 TB

400TB

480TB

640 TB

1,920 TB

2,880 TB

3,840 TB

DIMENSIONS

Height: 75in/190.8cm
Width: 24in/60.96cm
Depth: 44in/111.76cm
Weight: 910 lbs

Height: 75 in/ 190.8 cm
Width: 24 in/ 60.96 cm
Depth: 44 in/ 111.76 cm
Weight: 1050 lbs

Height: 75 in/ 190.8 cm
Width: 24 in/ 60.96 cm
Depth: 44 in/ 111.76 cm
Weight:1150 lbs

Height: 75in/190.8cm
Width: 24in/60.96cm
Depth: 44in/111.76cm
Weight: 1,360 lbs

Height: 75in/190.8cm
Width: 24in/60.96cm
Depth: 44in/111.76cm
Weight: 1,840 lbs

Height: 75in/190.8cm
Width: 24in/60.96cm
Depth: 44in/111.76cm
Weight: 2,200 lbs

Height: 75in/190.8cm
Width: 24in/60.96cm
Depth: 44in/111.76cm
Weight: 2,560 lbs

MAX POWER

3.5kVA

4.2kVA

4.9kVA

6.3kVA

7.6kVA

8.6kVA

9.6kVA

MAX HEATLOAD

11,813 BTU/hr

14,175 BTU/hr

16,538 BTU/hr

21,263 BTU/hr

25,650 BTU/hr

29,025 BTU/hr

32,400 BTU/hr

10 DRIVE UPGRADE

ADDITIONAL CAPACITY

320 TB

400TB

480TB

640 TB

NA

NA

NA

ADDITIONAL WEIGHT

120 lbs

150 lbs

180 lbs

240 lbs

NA

NA

NA

ADDITIONAL POWER

333VA

417VA

500VA

667VA

NA

NA

NA

ADDITIONAL HEAT LOAD

1,125 BTU/hr

1,406 BTU/hr

1,688 BTU/hr

2,250 BTU/hr

NA

NA

NA

The following specifications apply to all models.

ARCHITECTURE

Standard 40U deep cabinet
2U 4-node server enclosure
4U 60-disk drawer based disk enclosure
High density disk enclosure holds up to 480x8TB disks per rack
Fully accessible – field serviceable components
Conventional front to back cooling
HA Power cabling and cooling

POWER SPECIFICATIONS

Connection: 4 Single-Phase L6-30 (REDUNDANT POWER)
2 Three-Phase WYE S52.30 (REDUNDANT POWER)
2 Three-Phase Delta CS-8365C (REDUNDANT POWER)
Input Voltage (VAC): 200 - 240
Circuit Breaker (A) max. per AC Power Source: 30A / PDU
Frequency (Hz): 60 (North America), 50 - 60 (International)

CONNECTIVITY

Uplink Connectivity: up to 8 x 10GbE uplinks to customer network (80Gb/s maximum bandwidth), including high availability (HA) configuration
Network: dual 10 GbE data switches (TOR) and single 1 GbE management switch (internal traffic) per rack
Disk: Dual SAS cable connection between servers and disk enclosures

PROTOCOL

TCP/IP

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature (°F/°C): 41 - 90/ 5 - 32
Max. Altitude: 7,500 ft/ 2,286 m @ 90°F/32°C
Relative Humidity: 20 - 80% non-condensing
Raised Floor: Not Required

OPTIONS

ES5-40-T8T 40 x 8TB Drive Upgrade Kit (320TB)
Four Node Expansion (Server + 4 DAEs)

Close
ECS Appliance Gen-2 D-Series Detailed Specifications

ECS-D4500

ECS-D5600

ECS-D6200

ECS-D6200

ECS-D7800

CONFIGURATION

8 Nodes = 8 servers + 8 disk enclosures

8 Nodes = 8 servers + 8 disk enclosures

8 Nodes = 8 servers + 8 disk enclosures

8 Nodes = 8 servers + 8 disk enclosures

8 Nodes = 8 servers + 8 disk enclosures

DISK RATIO

1:70'

1:70'

1:70'

1:98'

1:98'

DISK TYPE

8TB 7200

10TB 7200

10TB 7200

8 TB 7200

10 TB 7200

RAW CAPACITY

4,480 TB

5,600TB

6,272 TB

6,272 TB

7,840 TB

DIMENSIONS

Height: 75in/190.8cm
Width: 24in/60.96cm
Depth: 44in/111.76cm
Weight: 2,100 lbs

Height: 75 in/ 190.8 cm
Width: 24 in/ 60.96 cm
Depth: 44 in/ 111.76 cm
Weight: 2100 lbs

Height: 75in/190.8cm
Width: 24in/60.96cm
Depth: 44in/111.76cm
Weight: 2,100 lbs

Height: 75in/190.8cm
Width: 24in/60.96cm
Depth: 44in/111.76cm
Weight: 2,750 lbs

Height: 75in/190.8cm
Width: 24in/60.96cm
Depth: 44in/111.76cm
Weight: 2,750 lbs

MAX POWER

10.0kVA

10.0kVA

10.0kVA

11.8kVA

11.8kVA

MAX HEATLOAD

33,750 BTU/hr

33,750 BTU/hr

39,825 BTU/hr

39,825 BTU/hr

39,825 BTU/hr

The following specifications apply to all models.

ARCHITECTURE

Standard 40U deep cabinet
2U 4-node server enclosure
4U 98-disk drawer based disk enclosure
High density disk enclosure holds up to 784 x 8TB disks per rack
Conventional front to back cooling
HA Power cabling and cooling

POWER SPECIFICATIONS

Connection: 6 Single-Phase L6-30 (REDUNDANT POWER)
2 Three-Phase WYE S52.30 (REDUNDANT POWER)
2 Three-Phase Delta CS-8365C (REDUNDANT POWER)
Input Voltage (VAC): 200 - 240
Frequency (Hz): 60 (North America), 50 - 60 (International)

CONNECTIVITY

Uplink Connectivity: up to 8 x 10GbE uplinks to customer network (80Gb/s maximum bandwidth), including high availability (HA) configuration
Network: dual 10 GbE data switches (TOR) and single 1 GbE management switch (internal traffic) per rack
Disk: Dual SAS cable connection between servers and disk enclosures

PROTOCOL

TCP/IP

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature (°F/°C): 41 - 90/ 5 - 32
Max. Altitude: 7,500 ft/ 2,286 m @ 90°F/32°C
Relative Humidity: 20 - 80% non-condensing
Raised Floor: Not Required

OPTIONS

ES5-112-T8T (112 x 8TB Drive Upgrade Kit - 896TB)

Close
Close

Software

vCenter Server

VMware vCenter Server provides a centralized platform for managing your VMware vSphere environments, allowing you to automate and deliver a virtual infrastructure with confidence.

vSAN
VMware vSAN is the industry-leading software powering Hyper-Converged Infrastructure solutions. vSAN is a core building block for the Software-Defined Data Center.

vRealize Suite
vRealize Suite is an enterprise-ready, cloud management platform that delivers the industry’s most complete solution for managing a heterogeneous, hybrid cloud.

Close

Services and Financing

Dell EMC Professional Services

  • Solutions customized for your needs: Leverage on-site integration or application implementation with Dell EMC Professional Services.
  • Support is always on for you: Enjoy unlimited access to 24×7 chat, email and phone support services with how-to assistance and disaster recovery from Dell EMC ProSupport.
  • Deployment assistance when you need it: You can trust Dell EMC to deploy the racked configuration in your data center, including network cabling, operating system, firmware and hypervisor with Dell ProDeploy.

Dell Financial Services

  • Full-service leasing and financing solutions are located throughout the US, Canada and Europe.
  • Dell Financial Services can finance the total technology solution.
OK

Cookies on our site: We use cookies to provide you with the best experience on our site. Use of this website signals your consent to use cookies. Learn more about cookies