Search the Dell Virtual Rack System

Run complex design simulations

Administration network and high-speed/low-latency switched fabric

1 x Dell Networking S3048-ON Ethernet 48-port switch and 1 x Mellanox SB7790 36-port EDR InfiniBand switches

Close

S3048-ON

  • Four SFP+ 10GbE ports for maximum flexibility and investment protection
  • I/O panel to PSU airflow or PSU to I/O panel airflow
  • Redundant, hot-swappable power supplies and fans
  • Supports ONIE for zero-touch installation of alternate network operating systems
  • Open networking offers choice of OS, such as Dell Networking OS9.X for inherent stability and feature richness, or the flexibility of a third-part OS (such as Cumulus Linux)
  • VRF-lite enables sharing of networking infrastructure and provides L3 traffic isolation across tenants (including support for multicast and IPv6 routing)
  • Enhanced automation capabilities (puppet agent, REST API extensions)
  • Supports jumbo frames for high-end performance in virtualized environments and IP storage/server communication
  • Increase VM Mobility region by stretching L2 VLAN within or across two DCs with unique VLT capabilities like Routed VLT, VLT Proxy Gateway
  • User port stacking support for up to six units managed as one logical device
  • Embedded Open Automation Framework adds VM awareness automated configuration and provisioning capabilities to simplify the management of virtual network environments
Tech Specs
FunctionalityS3048-ON

Line-rate ports

48 x 1000Base-T

40GbE ports

4 x 10GbE

Size

1RU, 1.71 h x 17.09 w x 12.6" d (4.4 h x 43.4 w x 32 cm d)

Weight

12.8 lbs (5.84 kg)

Power supply

90 - 264 VAC 50/60 Hz

Switch I/O bandwidth

260Gbps (full-duplex)

Forwarding rate

131 Mpps

Switching latency

3.7 microsec for 1000Base-T, 1.8 microsec for SFP+

Packet buffer memory

4MB

CPU memory

2GB

Close

Infrastructure server

1 x Dell EMC PowerEdge R630 head node

Close

Infrastructure server

  • PowerEdge R630 server
  • Dual Intel® Xeon® E5-2680 v4 processors
  • 128GB of memory, 8 x 16GB 2400MT/s DIMMs
  • PERC H730 RAID controller
  • 2 x 600GB 10K SAS drives in RAID 1
  • iDRAC Enterprise
  • 2 x 1100 W power supplies
  • EDR InfiniBand (optional)

Tech Specs
FeaturePowerEdge R630 technical specification

Form factor

1U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family

Processor sockets

2

Cache

2.5MB per core
Up to 22 cores

Chipset Intel

Intel C610 series chipset

Memory

Up to 1.5TB (24 DIMM slots): 4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s

I/O slots

Up to 3 x PCIe 3.0 plus dedicated PERC slot

RAID controllers

Internal controllers: PERC S130 (SW RAID), PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Drive bays

Internal hard drive bay and hot-plug backplane:
Up to 24 x 1.8” SATA SSD
Up to 10 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)
Up to 8 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)
Up to 4 NVMe PCIe

Maximum internal storage

Up to 23TB using 24 x 1.8” 0.96TB hot-plug SATA SSDs
Up to 18TB using 10 x 2.5” 1.8TB hot-plug SAS HDDs
Up to 14TB using 8 x 2.5” 1.8TB hot-plug SAS HDDs

Embedded NIC

4 x 1Gb, 2 x 1Gb + 2 x 10Gb, 4 x 10Gb

Power supplies

Titanium* efficiency 750W AC power supply; 1100W DC power supply; Platinum* efficiency 495W, 750W, 1100W

Availability

ECC memory, hot-plug hard drives, hot-plug redundant cooling, hot-plug redundant power, internal dual SD module, single device data correction (SDDC), spare rank, support for high availability clustering and virtualization, proactive systems management alerts

Systems management

Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile
Dell OpenManage Power Center
Remote management:
DRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade)
8GB vFlash media (upgrade)
16GB vFlash media (upgrade)
iDRAC Quick Sync
Dell OpenManage Integrations:
Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Integration for VMware® vCenter™
Dell OpenManage Connections:
HP Operations Manager
IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Operating systems

Microsoft Windows Server® 2008/2012 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008/2012 R2, x64 (includes Hyper-V)
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™

Dimensions

24 x 1.8” and 10 x 2.5” drive configuration: H: 4.28 cm (1.68 in.) x W: 48.23 cm (18.98 in.) x D: 75.51 cm (29.72 in.)
8 x 2.5” drive configuration: H: 4.28 cm (1.68 in.) W: 48.23 cm (18.98 in.) D: 70.05 cm (27.57 in.)

Recommended support

Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. Consulting and deployment offerings are also available. Contact your Dell representative today for more information. Availability and terms of Dell Services vary by region.

*80 PLUS certification
Close

Explicit building block with EDR InfiniBand

24 x Dell EMC PowerEdge C6320 explicit solver nodes and 1 x high-speed networking

Close

Explicit building block with EDR InfiniBand

  • PowerEdge C6320 server
  • Dual Intel Xeon E5-2697A v4 processors
  • 128GB of memory, 8 x 16GB 2400MT/s DIMMs
  • Mezzanine SAS RAID controller
  • 2 x 600GB 10K SAS drives in RAID 0
  • iDRAC Express
  • 2 x 1600 W power supplies in the chassis
  • EDR InfiniBand (optional)

Tech Specs
FeaturePowerEdge C6320 technical specification

Form factor

2U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family
Up to 4 x 2-socket servers; up to 22 cores per processor
Intel C612 chipset

Memory

16 DIMM slots for up to 512GB per node: 8GB/16GB/32GB DDR4 DIMM (up to 2400MT/s)

Primary storage

Maximum internal storage: 72TB SATA3 or 48TB NL-SAS

Drive bays and hard drives

24 x 2.5” or 12 x 3.5” hard drive options
24 x 2.5” hard drive option with variable drive allocation
Supports 7.2K, 10K, 15K RPM 2.5” and 3.5” SAS
Supports 7.2K RPM 2.5” and 3.5” SATA
2.5” SATA (7.2K): 250GB, 500GB, 1TB, 2TB
2.5” SAS (7.2K): 1TB, 2TB
2.5” SAS (10K): 600GB, 1.2TB
2.5” SAS (SAS12): 200GB, 400GB, 800GB
2.5” SATA SSD: 120GB, 160GB, 200GB, 400GB, 800GB, 960GB
2.5” SAS SSD: 200GB, 400GB, 800GB
3.5” SATA (7.2K): 1TB, 4TB, 6TB

Connectivity

Intel 82599ES 10GbE dual-port SFP+

USB ports

1 external rear port

I/O slots

1 x16 PCIe 3.0 half-height, half-length
1 x8 PCIe 3.0 mezzanine

I/O adapter options

1GbE:
Intel Powerville I350 dual-port 1GbE (PCIe adapter)
Intel Powerville I350 dual-port 1GbE PCIe (mezzanine)
10GbE: Mellanox ConnectX®-3 Pro dual-port 10GbE SVP+ (mezzanine)
10GbE:
Intel X540 Dual Port 10GbE 10Base-T (mezzanine)
Mellanox ConnectX-3 Pro dual-port 10GbE SFP+ (mezzanine)
InfiniBand:
Mellanox ConnectX-3 VPI single-port FDR/40GbE QSFP+ (PCIe adapter)
Mellanox ConnectX-3 VPI dual-port FDR/40GbE QSFP+ (PCIe adapter)
Mellanox ConnectX-3 VPI single-port FDR/40GbE QSFP+ (mezzanine)

Drive and RAID controllers

Intel C612 chipset SATA: AHCI SATA drives, RAID: 0, 1, 5, 10
PERC H330: SATA and SAS drives, x8 PCIe 3.0, RAID: 0, 1, 5, 10, 50 (optional)
PERC H730: SATA and SAS drives, x8 PCIe 3.0, RAID: 0, 1, 5, 10, 50, 60 (optional)
LSI® SAS 2008 Controller 6Gbs: mezzanine (optional), RAID: 0, 1, 10, JBOD (optional)
SATA DOM boot device (64Mb)
SAS SSD boot device (120Mb)

Power supplies

Dual hot-plug redundant high-efficiency 1400W or 1600W power supplies (200-220 VAC, 240 VDC)

Fans

Shared cooling with quick-disconnect 4x 60mm speed fans

Operating systems

Microsoft® Windows Server® 2012
Microsoft Windows Server 2012 R2
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux®

Hypervisors

Microsoft Windows Server 2012 (with Hyper-V® enabled)
VMware® vSphere® ESXi®

Systems management

Remote managment:
iDRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade option)
Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile

Dimensions and weight

H: 8.68 cm (3.42 in), W: 44.8 cm (17.6 in), D: 79.0 cm (31.1 in)
Weight (maximum configuration) 41 kg (90.4 lbs)
Weight (empty) 15.1 kg (33.3 lbs)

Services (Availability varies by region. Please contact your sales representative for details.)

Data Center Consulting Services Rack Integration (U.S. only, not available in China)
Rack Design Verification Configuration Services/CFI Onsite
Online Self Dispatch
Basic Support
ProSupport Plus
ProSupport Flex for Data Center
4-Hour Support
Keep Your Hard Drive
Support Assist: Proactive Automated Support
Enterprise Wide Contract IT
Remote Advisory Service
Certified Data Destruction
Specialized Onsite Services

Close

Implicit building block servers

12 x Dell EMC PowerEdge R630 implicit solver nodes

Close

Implicit building block servers

  • PowerEdge R630 server
  • Dual Intel Xeon E5-2667 v4 processors
  • 512GB of memory, 16 x 32GB 2400MT/s DIMMs
  • PERC H730 disk controller
  • 8 x 300GB 15K SAS drives in RAID 0
  • iDRAC Express
  • 2 x 1100 W power supplies
  • EDR InfiniBand (optional)

Tech Specs
FeaturePowerEdge R630 technical specification

Form factor

1U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family

Processor sockets

2

Cache

2.5MB per core
Up to 22 cores

Chipset Intel

Intel C610 series chipset

Memory

Up to 1.5TB (24 DIMM slots): 4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s

I/O slots

Up to 3 x PCIe 3.0 plus dedicated PERC slot

RAID controllers

Internal controllers: PERC S130 (SW RAID), PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Drive bays

Internal hard drive bay and hot-plug backplane:
Up to 24 x 1.8” SATA SSD
Up to 10 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)
Up to 8 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)
Up to 4 NVMe PCIe

Maximum internal storage

Up to 23TB using 24 x 1.8” 0.96TB hot-plug SATA SSDs
Up to 18TB using 10 x 2.5” 1.8TB hot-plug SAS HDDs
Up to 14TB using 8 x 2.5” 1.8TB hot-plug SAS HDDs

Embedded NIC

4 x 1Gb, 2 x 1Gb + 2 x 10Gb, 4 x 10Gb

Power supplies

Titanium* efficiency 750W AC power supply; 1100W DC power supply; Platinum* efficiency 495W, 750W, 1100W

Availability

ECC memory, hot-plug hard drives, hot-plug redundant cooling, hot-plug redundant power, internal dual SD module, single device data correction (SDDC), spare rank, support for high availability clustering and virtualization, proactive systems management alerts

Systems management

Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile
Dell OpenManage Power Center
Remote management:
DRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade)
8GB vFlash media (upgrade)
16GB vFlash media (upgrade)
iDRAC Quick Sync
Dell OpenManage Integrations:
Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Integration for VMware® vCenter™
Dell OpenManage Connections:
HP Operations Manager
IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Operating systems

Microsoft Windows Server® 2008/2012 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008/2012 R2, x64 (includes Hyper-V)
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™

Dimensions

24 x 1.8” and 10 x 2.5” drive configuration: H: 4.28 cm (1.68 in.) x W: 48.23 cm (18.98 in.) x D: 75.51 cm (29.72 in.)
8 x 2.5” drive configuration: H: 4.28 cm (1.68 in.) W: 48.23 cm (18.98 in.) D: 70.05 cm (27.57 in.)

Recommended support

Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. Consulting and deployment offerings are also available. Contact your Dell representative today for more information. Availability and terms of Dell Services vary by region.

*80 PLUS certification
Close

Implicit GPGPU building blocks

3 x Dell EMC PowerEdge R730 implicit GPU nodes

Close

Implicit GPGPU building blocks

  • PowerEdge R730 server
  • Dual Intel Xeon E5-2680 v4 processors
  • 256GB of memory, 16 x 16GB 2400MT/s DIMMs
  • PERC H730 disk controller
  • 8 x 300GB 15K SAS drives in RAID 0
  • iDRAC Express
  • 2 x 1100 W power supplies
  • One NVIDIA® Tesla® K80
  • EDR InfiniBand (optional)

Tech Specs
FeaturePowerEdge R730 technical specification

Form factor

2U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family

Processor sockets

2

Cache

2.5MB per core
Up to 22 cores

Chipset Intel

C610 series chipset

Memory

Up to 1.5TB (24 DIMM slots): 4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s

I/O slots

Up to 7 x PCIe 3.0 plus dedicated PERC slot

RAID controllers

Internal controllers: PERC S130 (SW RAID), PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Drive bays

Internal hard drive bay and hot-plug backplane:
Up to 16 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)
Up to 8 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)

Maximum internal storage

Up to 29TB using 16 x 2.5” 1.8TB SAS drives
Up to 64TB using 8 x 3.5” 8TB NL-SAS hard drives

Embedded NIC

4 x 1GbE, 2 x 10+2GbE, 4 x 10GbE NDC

Power supplies

Titanium* efficiency 750W AC power supply; 1100W DC power supply; Platinum* efficiency 495W, 750W, 1100W AC power supply

Availability

ECC memory, hot-plug hard drives, hot-plug redundant cooling, hot-plug redundant power, internal dual SD module, single device data correction (SDDC), spare rank, tool-less chassis, support for high availability clustering and virtualization, proactive systems management alerts, iDRAC8 with Lifecycle Controller

Systems management

Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile
Dell OpenManage Power Center
Remote management:
DRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade)
8GB vFlash media (upgrade)
16GB vFlash media (upgrade)
iDRAC Quick Sync
Dell OpenManage Integrations:
Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Integration for VMware® vCenter™
Dell OpenManage Connections:
HP Operations Manager
IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Operating systems

Microsoft Windows Server® 2008/2012 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008/2012 R2, x64 (includes Hyper-V)
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™

Dimensions

H: 8.73 cm (3.44 in.) x W: 44.40 cm (17.49 in.) x D: 68.40 cm (26.92 in.)

Recommended support

Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. Consulting and deployment offerings are also available. Contact your Dell representative today for more information. Availability and terms of Dell Services vary by region.

*80 PLUS certification
Close

Virtual desktop infrastructure server

1 x Dell EMC PowerEdge R730 remote visualization server

Close

Virtual desktop infrastructure server

  • PowerEdge R730 server
  • Dual Intel Xeon E5-2680 v4 processors
  • 512GB of memory, 16 x 32GB 2400MT/s DIMMs
  • PERC H730 disk controller
  • 2 x 600GB 10K SAS drives in RAID 1 (for operating system)
  • 4 x 600GB 10K SAS drives in RAID 0 (for local temporary storage)
  • QLogic 10GbE Network Daughter Card
  • iDRAC Express
  • 2 x 1100 W power supplies
  • One NVIDIA GRID® K2
  • EDR InfiniBand (optional)

Tech Specs
FeaturePowerEdge R730 technical specification

Form factor

2U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family

Processor sockets

2

Cache

2.5MB per core
Up to 22 cores

Chipset Intel

C610 series chipset

Memory

Up to 1.5TB (24 DIMM slots): 4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s

I/O slots

Up to 7 x PCIe 3.0 plus dedicated PERC slot

RAID controllers

Internal controllers: PERC S130 (SW RAID), PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Drive bays

Internal hard drive bay and hot-plug backplane:
Up to 16 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)
Up to 8 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)

Maximum internal storage

Up to 29TB using 16 x 2.5” 1.8TB SAS drives
Up to 64TB using 8 x 3.5” 8TB NL-SAS hard drives

Embedded NIC

4 x 1GbE, 2 x 10+2GbE, 4 x 10GbE NDC

Power supplies

Titanium* efficiency 750W AC power supply; 1100W DC power supply; Platinum* efficiency 495W, 750W, 1100W AC power supply

Availability

ECC memory, hot-plug hard drives, hot-plug redundant cooling, hot-plug redundant power, internal dual SD module, single device data correction (SDDC), spare rank, tool-less chassis, support for high availability clustering and virtualization, proactive systems management alerts, iDRAC8 with Lifecycle Controller

Systems management

Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile
Dell OpenManage Power Center
Remote management:
DRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade)
8GB vFlash media (upgrade)
16GB vFlash media (upgrade)
iDRAC Quick Sync
Dell OpenManage Integrations:
Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Integration for VMware® vCenter™
Dell OpenManage Connections:
HP Operations Manager
IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Operating systems

Microsoft Windows Server® 2008/2012 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008/2012 R2, x64 (includes Hyper-V)
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™

Dimensions

H: 8.73 cm (3.44 in.) x W: 44.40 cm (17.49 in.) x D: 68.40 cm (26.92 in.)

Recommended support

Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. Consulting and deployment offerings are also available. Contact your Dell representative today for more information. Availability and terms of Dell Services vary by region.

*80 PLUS certification
Close

NFS storage solution

2 x Dell EMC PowerEdge R630 NSS and 1 x PowerVault MD3460 NSS

Close

NFS storage solution

The Dell EMC network file system (NFS) Storage Solution (NSS) provides a tuned NFS storage option that can be used as primary storage for user home directories and application data. NSS is optional, a cluster can be configured without NSS.

Tech Specs
FeaturePowerEdge R630 technical specification

Form factor

1U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family

Processor sockets

2

Cache

2.5MB per core
Up to 22 cores

Chipset Intel

Intel C610 series chipset

Memory

Up to 1.5TB (24 DIMM slots): 4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s

I/O slots

Up to 3 x PCIe 3.0 plus dedicated PERC slot

RAID controllers

Internal controllers: PERC S130 (SW RAID), PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Drive bays

Internal hard drive bay and hot-plug backplane:
Up to 24 x 1.8” SATA SSD
Up to 10 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)
Up to 8 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)
Up to 4 NVMe PCIe

Maximum internal storage

Up to 23TB using 24 x 1.8” 0.96TB hot-plug SATA SSDs
Up to 18TB using 10 x 2.5” 1.8TB hot-plug SAS HDDs
Up to 14TB using 8 x 2.5” 1.8TB hot-plug SAS HDDs

Embedded NIC

4 x 1Gb, 2 x 1Gb + 2 x 10Gb, 4 x 10Gb

Power supplies

Titanium* efficiency 750W AC power supply; 1100W DC power supply; Platinum* efficiency 495W, 750W, 1100W

Availability

ECC memory, hot-plug hard drives, hot-plug redundant cooling, hot-plug redundant power, internal dual SD module, single device data correction (SDDC), spare rank, support for high availability clustering and virtualization, proactive systems management alerts

Systems management

Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile
Dell OpenManage Power Center
Remote management:
DRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade)
8GB vFlash media (upgrade)
16GB vFlash media (upgrade)
iDRAC Quick Sync
Dell OpenManage Integrations:
Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Integration for VMware® vCenter™
Dell OpenManage Connections:
HP Operations Manager
IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Operating systems

Microsoft Windows Server® 2008/2012 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008/2012 R2, x64 (includes Hyper-V)
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™

Dimensions

24 x 1.8” and 10 x 2.5” drive configuration: H: 4.28 cm (1.68 in.) x W: 48.23 cm (18.98 in.) x D: 75.51 cm (29.72 in.)
8 x 2.5” drive configuration: H: 4.28 cm (1.68 in.) W: 48.23 cm (18.98 in.) D: 70.05 cm (27.57 in.)

Recommended support

Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. Consulting and deployment offerings are also available. Contact your Dell representative today for more information. Availability and terms of Dell Services vary by region.

*80 PLUS certification
Close
Close

NFS storage solution

The Dell EMC network file system (NFS) Storage Solution (NSS) provides a tuned NFS storage option that can be used as primary storage for user home directories and application data. NSS is optional, a cluster can be configured without NSS.

Tech Specs
MD3460 specifications

Drives

Mix and match up to 60 x 3.5” and 2.5” SAS, NL-SAS, SSD, SED

Drive capacities

3.5” NL-SAS 7.2K RPM: 500GB, 1TB*, 2TB*, 3TB*, 4TB*, 6TB, 8TB, 10TB
2.5” SAS 15K RPM: 146GB*, 300GB*, 600GB*
2.5” SAS 10K RPM: 146GB, 300GB*, 600GB*, 900GB*, 1.2TB*
2.5” NL-SAS 7.2K RPM: 500GB*, 1TB*, 2TB
SSD: 200GB, 400GB, 800GB (WI); 400GB, 800GB, 1.6TB (MU); 800GB, 1.6TB (RI) (available with 3.5” carriers)

Dimensions (height x width x depth)

17.78 cm (7.0”) x 48.26 cm (19”) x 82.55 cm (19”)

Maximum weight

105.24 kg (232 lb)

Expansion capabilities**

Up to 180 drives using the MD3060e

Management

2nd generation multi-protocol Modular Disk Storage Manager, Java based user interface
Multi-path graphical software provides failover management of redundant data paths between the server and storage array

Standard features

DDP***, thin provisioning, VAAI, vCenter Plug-in, VASA, SRA, HPT, SSD cache, SED, Microsoft Windows ODX

Optional features

Snapshot, VDC, HDD expansion option**

Controllers

Support up to 64 servers when configured with a Fibre Channel switch, available with 4GB cache controllers

Controller features

Each controller provides four 12Gbps SAS ports; a total of eight for dual controller models
Each controller contains 4GB or 8GB of battery-backed cache
Dual controllers operate in an active-active environment mirroring each other’s cache
Cache protection is provided via flash memory for permanent data protection
DDP*** eliminates the need for complex RAID management while optimizing data protection, and can be used with existing RAID configurations
Dual controllers are required for the MD3460 dense array
4GB and 8GB only available as dual controller option

Cache

Dual 4GB or 8GB cache
Up to 16GB cache (8GB per controller)

Server support

Dell PowerEdge™ servers

RAID

Support for RAID levels 0, 1, 10, 5, 6
Up to 180** physical disks per group in RAID 0, 10
Up to 30 physical disks per group in RAID 5, 6
Up to 512 virtual disks
DDP***

Operating system

Microsoft® Windows®, VMware®, Microsoft Hyper-V®, Red Hat® and SUSE®

Rack support

Dell ReadyRails™ II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racks.

Power

Wattage: AC – 1755W (dense arrays do not support DC power supplies)
Heat dissipation: 5988 BTU/hr
Voltage: 220V AC, auto ranging, 50Hz/60Hz
Frequency: 50/60Hz

Temperature

Operating: 10° to 35°C (50° to 95°F) with a maximum temperature gradation of 10°C per hour

Relative humidity

Operating: 20% to 80% (non-condensing) with a maximum humidity gradation of 10% per hour

Altitude

Operating: -30.5 m to 3000 m (-100 ft to 9,840 ft) NOTE: For altitudes above 2950 ft, the maximum operating temperature is derated 1.8°F/1000 ft

*Self-encrypting drives (SED) available
**Expansion beyond 120 drives is based on the purchase of a premium feature for additional drives
***MD34x0 arrays are limited to a maximum of 20 DDPs per array
Close

Would You Like More Information?

Click the envelope icon at any time to use our contact form to have a Dell EMC representative get in touch with you, or click Contact Me now.

Contact Me No Thanks