Search the Dell Virtual Rack System

Architected to deliver high throughput and fast turnaround

Networking

1 x S3048-ON GbE switch, 1 x Mellanox SX6036 InfiniBand core, 2 x Mellanox SX6036 InfiniBand leaf

Close

S3048-ON

1GbE top-of-rack (TOR) switch with an industry-hardened operating system and support for open networking, providing freedom to run third-party operating systems.

  • Four SFP+ 10GbE ports for maximum flexibility and investment protection
  • I/O panel to PSU airflow or PSU to I/O panel airflow
  • Redundant, hot-swappable power supplies and fans
  • Supports ONIE for zero-touch installation of alternate network operating systems
  • Open networking offers choice of OS, such as Dell Networking OS9.X for inherent stability and feature richness, or the flexibility of a third-part OS (such as Cumulus Linux)
  • VRF-lite enables sharing of networking infrastructure and provides L3 traffic isolation across tenants (including support for multicast and IPv6 routing)
  • Enhanced automation capabilities (puppet agent, REST API extensions)
  • Supports jumbo frames for high-end performance in virtualized environments and IP storage/server communication
  • Increase VM Mobility region by stretching L2 VLAN within or across two DCs with unique VLT capabilities like Routed VLT, VLT Proxy Gateway
  • User port stacking support for up to six units managed as one logical device
  • Embedded Open Automation Framework adds VM awareness automated configuration and provisioning capabilities to simplify the management of virtual network environments
Tech Specs
FunctionalityS3048-ON

Line-rate ports

48 x 1000Base-T

40GbE ports

4 x 10GbE

Size

1RU, 1.71 h x 17.09 w x 12.6" d (4.4 h x 43.4 w x 32 cm d)

Weight

12.8 lbs (5.84 kg)

Power supply

90 - 264 VAC 50/60 Hz

Switch I/O bandwidth

260Gbps (full-duplex)

Forwarding rate

131 Mpps

Switching latency

3.7 microsec for 1000Base-T, 1.8 microsec for SFP+

Packet buffer memory

4MB

CPU memory

2GB

Close
Close

Mellanox SX6036

SX6036 switch system provides the highest performing fabric solution in a 1U form factor by delivering up to 4Tb/s of non-blocking bandwidth with 200ns port-to-port latency.

Benefits

  • Software Defined Network (SDN) support
  • Industry-leading, switch platform in performance, power, and density
  • Designed for energy and cost savings
  • Quick and easy setup and management
  • Maximizes performance by removing fabric congestions
  • Fabric Management for cluster and converged I/O applications

Key features

  • 36 FDR (56Gb/s) ports in a 1U switch
  • Up to 4Tb/s aggregate switching capacity
  • Compliant with IBTA 1.2.1 and 1.3
  • FDR/FDR10 support for Forward Error Correction (FEC)
  • InfiniBand to Ethernet Bridging
  • Optional redundant power supplies and fan drawers

CIFS Gateway

1 x PowerEdge R430 server

Close

PowerEdge R430

Peak 2-socket performance for HPC, web tech and infrastructure scale-out.

Tech Specs
Feature Description
Form factor 1U rack server
Processor Intel® Xeon® processor E5-2600 v3 product family
Memory DDR4 DIMMs at up to 2133MT/s, 12 DIMM slots: 2GB/4GB/8GB/16GB/32GB
FeaturePowerEdge R430 technical specification

Form factor

1U rack server

Processor

Intel® Xeon® processor E5-2600 v3 product family
Processor sockets: 2
Chipset: C610
Internal interconnect: Up to 9.6GT/s
Cache: 2.5MB per core; core options: 6, 8, 10, 12, 16

Memory

DDR4 DIMMs at up to 2133MT/s
12 DIMM slots: 2GB/4GB/8GB/16GB/32GB

I/O slots

2 PCIe 3.0

Storage

SAS, SATA, nearline SAS, SSD
Multiple R430 chassis available:
10 x 2.5” hot-plug drives
8 x 2.5” hot-plug drives
4 x 3.5” hot-plug drives
4 x 3.5” cabled drives

RAID controllers

Internal controllers: PERC S130 (SW RAID), PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830

Communications

4 x 1GbE LOM; Add-in network interface cards (NICs) and host bus adapters (HBAs)

Power supplies

450W, 550W PSU

Systems management

Systems management: IPMI 2.0 compliant; Dell OpenManage Essentials; Dell OpenManage Mobile; Dell OpenManage Power Center

Operating systems

Microsoft® Windows Server® 2008 R2
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
VMware® ESX®

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Close

Lustre admin

1 x PowerEdge R630 server

Close

PowerEdge R630

Maximize datacenter efficiency with an ultra-dense virtualization or database engine that supports up to 24 flash SSDs in a 1U chassis.

Tech Specs
Feature Description
Form factor 1U rack server
Processor Intel® Xeon® processor E5-2600 v4 product family
Memory Up to 256GB
FeaturePowerEdge R630 technical specification

Form factor

1U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family

Processor sockets

2

Cache

2.5MB per core
Up to 22 cores

Chipset Intel

Intel C610 series chipset

Memory

Up to 1.5TB (24 DIMM slots): 4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s

I/O slots

Up to 3 x PCIe 3.0 plus dedicated PERC slot

RAID controllers

Internal controllers: PERC S130 (SW RAID), PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Drive bays

Internal hard drive bay and hot-plug backplane:
Up to 24 x 1.8” SATA SSD
Up to 10 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)
Up to 8 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)
Up to 4 NVMe PCIe

Maximum internal storage

Up to 23TB using 24 x 1.8” 0.96TB hot-plug SATA SSDs
Up to 18TB using 10 x 2.5” 1.8TB hot-plug SAS HDDs
Up to 14TB using 8 x 2.5” 1.8TB hot-plug SAS HDDs

Embedded NIC

4 x 1Gb, 2 x 1Gb + 2 x 10Gb, 4 x 10Gb

Power supplies

Titanium* efficiency 750W AC power supply; 1100W DC power supply; Platinum* efficiency 495W, 750W, 1100W

Availability

ECC memory, hot-plug hard drives, hot-plug redundant cooling, hot-plug redundant power, internal dual SD module, single device data correction (SDDC), spare rank, support for high availability clustering and virtualization, proactive systems management alerts

Systems management

Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile
Dell OpenManage Power Center
Remote management:
DRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade)
8GB vFlash media (upgrade)
16GB vFlash media (upgrade)
iDRAC Quick Sync
Dell OpenManage Integrations:
Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Integration for VMware® vCenter™
Dell OpenManage Connections:
HP Operations Manager
IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Operating systems

Microsoft Windows Server® 2008/2012 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008/2012 R2, x64 (includes Hyper-V)
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™

Dimensions

24 x 1.8” and 10 x 2.5” drive configuration: H: 4.28 cm (1.68 in.) x W: 48.23 cm (18.98 in.) x D: 75.51 cm (29.72 in.)
8 x 2.5” drive configuration: H: 4.28 cm (1.68 in.) W: 48.23 cm (18.98 in.) D: 70.05 cm (27.57 in.)

Recommended support

Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. Consulting and deployment offerings are also available. Contact your Dell representative today for more information. Availability and terms of Dell Services vary by region.

*80 PLUS certification
Close

Login node and Head node

2 x PowerEdge R430 servers for each node

Close

PowerEdge R430

Peak 2-socket performance for HPC, web tech and infrastructure scale-out.

Tech Specs
Feature Description
Form factor 1U rack server
Processor Intel® Xeon® processor E5-2600 v3 product family
Memory DDR4 DIMMs at up to 2133MT/s, 12 DIMM slots: 2GB/4GB/8GB/16GB/32GB
FeaturePowerEdge R430 technical specification

Form factor

1U rack server

Processor

Intel® Xeon® processor E5-2600 v3 product family
Processor sockets: 2
Chipset: C610
Internal interconnect: Up to 9.6GT/s
Cache: 2.5MB per core; core options: 6, 8, 10, 12, 16

Memory

DDR4 DIMMs at up to 2133MT/s
12 DIMM slots: 2GB/4GB/8GB/16GB/32GB

I/O slots

2 PCIe 3.0

Storage

SAS, SATA, nearline SAS, SSD
Multiple R430 chassis available:
10 x 2.5” hot-plug drives
8 x 2.5” hot-plug drives
4 x 3.5” hot-plug drives
4 x 3.5” cabled drives

RAID controllers

Internal controllers: PERC S130 (SW RAID), PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830

Communications

4 x 1GbE LOM; Add-in network interface cards (NICs) and host bus adapters (HBAs)

Power supplies

450W, 550W PSU

Systems management

Systems management: IPMI 2.0 compliant; Dell OpenManage Essentials; Dell OpenManage Mobile; Dell OpenManage Power Center

Operating systems

Microsoft® Windows Server® 2008 R2
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
VMware® ESX®

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Close

Storage

2 x PowerEdge R630 servers (NFS storage), 1 x Isilon X410, 2 x PowerEdge R630 (Lustre Storage servers), 1 x PowerVault MD3420 array

Close

PowerEdge R630

The NFS Gateway server is the Dell EMC PowerEdge R630 running Red Hat® Enterprise Linux (RHEL) operating system, with Red Hat’s XFS and Red Hat Cluster Suite packages, and it provides file access to user data.

The metadata server pair is comprised of two PowerEdge R630 servers configured as an active/passive highly available cluster.

Tech Specs
Feature Description
Form factor 1U rack server
Processor Intel® Xeon® processor E5-2600 v4 product family
Memory Up to 256GB
FeaturePowerEdge R630 technical specification

Form factor

1U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family

Processor sockets

2

Cache

2.5MB per core
Up to 22 cores

Chipset Intel

Intel C610 series chipset

Memory

Up to 1.5TB (24 DIMM slots): 4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s

I/O slots

Up to 3 x PCIe 3.0 plus dedicated PERC slot

RAID controllers

Internal controllers: PERC S130 (SW RAID), PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Drive bays

Internal hard drive bay and hot-plug backplane:
Up to 24 x 1.8” SATA SSD
Up to 10 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)
Up to 8 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)
Up to 4 NVMe PCIe

Maximum internal storage

Up to 23TB using 24 x 1.8” 0.96TB hot-plug SATA SSDs
Up to 18TB using 10 x 2.5” 1.8TB hot-plug SAS HDDs
Up to 14TB using 8 x 2.5” 1.8TB hot-plug SAS HDDs

Embedded NIC

4 x 1Gb, 2 x 1Gb + 2 x 10Gb, 4 x 10Gb

Power supplies

Titanium* efficiency 750W AC power supply; 1100W DC power supply; Platinum* efficiency 495W, 750W, 1100W

Availability

ECC memory, hot-plug hard drives, hot-plug redundant cooling, hot-plug redundant power, internal dual SD module, single device data correction (SDDC), spare rank, support for high availability clustering and virtualization, proactive systems management alerts

Systems management

Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile
Dell OpenManage Power Center
Remote management:
DRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade)
8GB vFlash media (upgrade)
16GB vFlash media (upgrade)
iDRAC Quick Sync
Dell OpenManage Integrations:
Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Integration for VMware® vCenter™
Dell OpenManage Connections:
HP Operations Manager
IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Operating systems

Microsoft Windows Server® 2008/2012 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008/2012 R2, x64 (includes Hyper-V)
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™

Dimensions

24 x 1.8” and 10 x 2.5” drive configuration: H: 4.28 cm (1.68 in.) x W: 48.23 cm (18.98 in.) x D: 75.51 cm (29.72 in.)
8 x 2.5” drive configuration: H: 4.28 cm (1.68 in.) W: 48.23 cm (18.98 in.) D: 70.05 cm (27.57 in.)

Recommended support

Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. Consulting and deployment offerings are also available. Contact your Dell representative today for more information. Availability and terms of Dell Services vary by region.

*80 PLUS certification
Close
Close

Isilon X410

With Dell EMC Isilon X410, you get a highly versatile scale-out NAS platform that provides great performance and high capacity with unmatched efficiency. Isilon X410 allows you to easily scale from a 3-node cluster with 108TB of capacity to a 144-node cluster with over 20PB, all in a single file system. Management stays simple at any scale.

Tech Specs
Feature Description
Drives HDD: 3.5” 7.2K, 1TB, 2TB, 3TB, 4TB; SSD: 200GB, 400GB, 800GB, 1.6TB
Memory 64GB, 128GB, 256GB
Front-end networking 2 x 1GbE and 2 x 10GbE (SFP+ or twin-ax copper)
Drive controller SATA-3, 6Gb/s
Processor Dual, 8-core Intel Xeon processor E5
EMC Isilon X-Series Node Specifications

Isilon X410 Node Attributes and Options (requires
Isilon OneFS 7.1.1 operating system or later)

1TB HDD

2TB HDD

3TB HDD

4TB HDD

Capacity

30TB - 36TB

60TB - 72TB

90TB - 108TB

120TB - 144TB

Hard drives (3.5" 7.2K RPM)

30 to 36

30 to 36

30 to 36

30 to 36

Self-encrypting drive (SED HDD) option

No

No

Yes

Yes

Solid-state drives (SSD) 200GB, 400GB or 800GB

Up to 6

Up to 6

Up to 6

Up to 6

Self-encrypting drive (SED SSD) option (800GB)

No

No

Yes (0, 2, 4 or 6)

Yes (0, 2, 4 or 6)

The following applies to all nodes:

System ECC memory

64GB, 128GB or 256GB

Front-end networking

2 x 1GbE and 2 x 10GbE (SFP+ or twin-ax copper)

Network interfaces

Isilon network interfaces support IEEE 802.3 standards for 10Gbps, 1Gbps and 100Gbps network connectivity

Drive controller

SATA-3, 6Gb/s

Processor

Dual Intel® Xeon® processor

Infrastructure networking

2 InfiniBand connections supporting DDR and QDR links

Non-volatile RAM (VRAM)

2GB

Typical power consumption @ 100V

NA

Typical power consumption @ 240V

700 Watts

Typical thermal rating

2,400 BTU/hr

Close
Close

MD3420

  • 12Gb shared storage solution providing high availability data access
  • Four SAS ports per controller
  • High Performance Tier (HPT) firmware upgrade to boost performance
  • Dual 4GB or 8GB cache controllers
Tech Specs
Feature Description
Drives 24 x 2.5" SAS, NL-SAS, SSD
Connection 12Gb SAS
Controller 16GB (8GB per controller)
Product specificationsMD3420

Drives

24 x 2.5” SAS, NL-SAS, SSD, SED

Drive capacities

SAS 15K RPM: 146GB*, 300GB*, 600GB*
SAS 10K RPM: 146GB, 300GB*, 600GB*, 900GB*, 1.2TB*, 1.8TB
NL-SAS 7.2K RPM: 500GB*, 1TB*, 2TB
SSD: 200GB, 400GB, 800GB (WI); 400GB, 800GB, 1.6TB (MU); 800GB, 1.6TB (RI)

Dimension

8.68 cm (3.42 in) x 44.63 cm (17.57 in) x 50.8 cm (20 in)

Maximum weight

24.2 kg (53.35 lb)

Expansion capabilities**

Up to 192 drives using the MD1200 or MD1220

Management

2nd generation multi-protocol Modular Disk Storage Manager, Java based user interface
Multi-path graphical software provides failover management of redundant data paths between the server and storage array

Standard features

Dynamic Disk Pools (DDP)***, thin provisioning, VAAI, vCenter Plug-in, VASA, SRA, SED, Microsoft Windows ODX

Optional features

Snapshot, VDC, HPT, HDD expansion option**

Controllers

Single 4GB cache; Dual 4GB or 8GB cache

Controller features

Each controller provides four 12Gbps SAS ports; a total of eight for dual controller models
Each controller contains 4GB or 8GB of battery-backed cache
Dual controllers operate in an active-active environment mirroring each other’s cache
Cache protection is provided via flash memory for permanent data protection
DDP*** eliminates the need for complex RAID management while optimizing data protection, and can be used with existing RAID configurations
4GB and 8GB only available as dual controller option

Maximum cache

4 x 12Gb SAS

Server support

Dell PowerEdge™ servers

RAID

Support for RAID levels 0, 1, 10, 5, 6
Up to 180/192** physical disks per group in RAID 0, 10
Up to 30 physical disks per group in RAID 5, 6
Up to 512 virtual disks
DDP***

Operating system

Microsoft® Windows®, VMware®, Microsoft Hyper-V®, Red Hat® and SUSE®

Rack support

Dell ReadyRails™ II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racks.

Power

Wattage: AC – 600W peak output; DC – 700W (2U arrays support DC power supplies)
Heat dissipation: 2047 BTU/hr
Voltage: 100 to 240V AC; 48V DC
Frequency: 50/60Hz

Temperature

Operating: 10° to 35°C (50° to 95°F) with a maximum temperature gradation of 10°C per hour
Supports Fresh Air cooling, up to 35°C

Relative humidity

Operating: 20% to 80% (non-condensing) with a maximum humidity gradation of 10% per hour

Altitude

Operating: -16 m to 3048 m (-50 ft to 10,000 ft)
NOTE: For altitudes above 2950 feet, the maximum operating temperature is derated 1°F/550 ft

*Self-encrypting drives (SED) available
**Expansion beyond 120 drives is based on the purchase of a premium feature for additional drives
***MD34x0 arrays are limited to a maximum of 20 DDPs per array
Close

Accelerator nodes

1 x PowerEdge R730 server, 2 x PowerEdge C4130 servers

Close

PowerEdge R730

The Dell EMC PowerEdge R730 server lets you adapt to virtually any workload with a scalable server featuring an optimal mix of memory, storage, processing and GPUs. Choice of accelerators: NVIDIA® Tesla™ K80 GPU, NVIDIA Tesla P100 SXM2/PCIe GPUs.

Tech Specs
Feature Description
Form factor 2U rack server
Processor Intel® Xeon® processor E5-2600 v4 product family
Memory Up to 768GB (24 DIMM slots): 4GB/8GB/16GB/32GB DDR4 up to 2133MT/s
I/O slots Up to 7 x PCIe 3.0 plus dedicated PERC slot
Embedded NIC 4 x 1GbE, 2 x 10+2GbE, 4 x 10GbE NDC
FeaturePowerEdge R730 technical specification

Form factor

2U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family

Processor sockets

2

Cache

2.5MB per core
Up to 22 cores

Chipset Intel

C610 series chipset

Memory

Up to 1.5TB (24 DIMM slots): 4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s

I/O slots

Up to 7 x PCIe 3.0 plus dedicated PERC slot

RAID controllers

Internal controllers: PERC S130 (SW RAID), PERC H330, PERC H730, PERC H730P
External HBAs (RAID): PERC H830
External HBAs (non-RAID): 12Gbps SAS HBA

Drive bays

Internal hard drive bay and hot-plug backplane:
Up to 16 x 2.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)
Up to 8 x 3.5” SAS, SATA (HDD, SSD), or NL-SAS (HDD)

Maximum internal storage

Up to 29TB using 16 x 2.5” 1.8TB SAS drives
Up to 64TB using 8 x 3.5” 8TB NL-SAS hard drives

Embedded NIC

4 x 1GbE, 2 x 10+2GbE, 4 x 10GbE NDC

Power supplies

Titanium* efficiency 750W AC power supply; 1100W DC power supply; Platinum* efficiency 495W, 750W, 1100W AC power supply

Availability

ECC memory, hot-plug hard drives, hot-plug redundant cooling, hot-plug redundant power, internal dual SD module, single device data correction (SDDC), spare rank, tool-less chassis, support for high availability clustering and virtualization, proactive systems management alerts, iDRAC8 with Lifecycle Controller

Systems management

Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile
Dell OpenManage Power Center
Remote management:
DRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade)
8GB vFlash media (upgrade)
16GB vFlash media (upgrade)
iDRAC Quick Sync
Dell OpenManage Integrations:
Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Integration for VMware® vCenter™
Dell OpenManage Connections:
HP Operations Manager
IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Rack support

ReadyRails™ II sliding rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded hole racks, with support for optional tool-less cable management arm.

Operating systems

Microsoft Windows Server® 2008/2012 SP2, x86/x64 (x64 includes Hyper-V®)
Microsoft Windows Server 2008/2012 R2, x64 (includes Hyper-V)
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
Optional embedded hypervisors:
Citrix® XenServer®
VMware vSphere® ESXi™

Dimensions

H: 8.73 cm (3.44 in.) x W: 44.40 cm (17.49 in.) x D: 68.40 cm (26.92 in.)

Recommended support

Dell ProSupport Plus for critical systems or Dell ProSupport for premium hardware and software support for your PowerEdge solution. Consulting and deployment offerings are also available. Contact your Dell representative today for more information. Availability and terms of Dell Services vary by region.

*80 PLUS certification
Close
Close

PowerEdge C4130

The Dell EMC PowerEdge C4130 server lets you drive the most demanding HPC, data visualization and rendering workloads with a flexible, dense 1U rack server optimized for GPUs and co-processors. Choice of accelerators: NVIDIA® Tesla™ K80 GPU, NVIDIA Tesla P100 SXM2/PCIe GPUs.

Tech Specs
Feature Description
Form factor 1U rack server
Processor Intel® Xeon® processor E5-2600 v4 product family, 2 sockets, C612 series chipset, internal interconnect up to 9.6GT/s
Memory DDR4 DIMMs at up to 2400MT/s; 16 DIMM slots: 4GB/8GB/16GB/32GB/64GB
FeaturePowerEdge C4130 technical specification

Form factor

1U rack server

Processor

Intel® Xeon® processor E5-2600 v4 product family, 2 sockets, C612 series chipset, internal interconnect up to 9.6GT/s

Memory

DDR4 DIMMs at up to 2400MT/s; 16 DIMM slots: 4GB/8GB/16GB/32GB/64GB

Supported GPUs

NVIDIA Tesla K40, K80, M60

Network controller

2 x 1GbE LOM

I/O slots

Up to 2x PCIe 3.0 low-profile adapters (back) Support for InfiniBand® EDR, FDR and NVIDIA® GPUDIRECT

Optional 96-lane PCIe 3.0 switch for certain accelerator configurations 4 x16 PCIe slots (front) for the GPU

Storage

Up to 2 x 1.8” SATA SSD boot drives Optional data drive tray supports up to 4 x 2.5” SAS/SATA drives Optional 12Gb/s SAS and 6Gb/s SATA (with PERC9 card)

RAID controller

Optional internal controller: PERC H330, H730, H730P and H810

Power supplies

1100W, 1600W, 2000W hot-plug power supply unit (PSU) Redundant PSU (1+1) option available

Systems management

2.0 compliant; Dell OpenManage Essentials; Dell OpenManage Mobile; Dell OpenManage Power Center
Remote management: iDRAC8 with Lifecycle Controller, iDRAC8 Express (default), iDRAC8 Enterprise (upgrade) 8GB vFlash media (upgrade), 16GB vFlash media (upgrade) iDRAC Quick Sync
Dell OpenManage Integrations: Dell OpenManage Integration Suite for Microsoft® System Center
Dell OpenManage Connections: HP Operations Manager, IBM Tivoli® Netcool® and CA Network and Systems Management
Dell OpenManage Plug-in for Oracle® Database Manager

Operating systems

Microsoft Windows Server 2012; Microsoft Windows Server 2012 R2; Novell SUSE; Linux Enterprise Server; Citrix XenServer; Red Hat Enterprise Linux; VMware ESX

Close

Compute nodes

1 x PowerEdge C6320, 3 x PowerEdge FX2 with PowerEdge FC430

Close

PowerEdge C6320

The Dell EMC PowerEdge C6320 server brings greater performance and improved energy efficiency with optimized compute, processors and memory for the most demanding high-performance computing and scale-out workloads. It features the Intel Xeon processor E5-2600 v4 product family and iDRAC8 with Lifecycle Controller.

Tech Specs
Feature Description
Form factor 2U rack server
Processor Intel Xeon processor E5-2600 v4 product family
Memory 16 DIMM slots for up to 512GB per node: 8GB/16GB/32GB DDR4 DIMMs (Up to 2400MT/s)
Primary storage Maximum internal storage: 72TB SATA3 or nearline 48TB SAS
FeaturePowerEdge C6320 technical specification

Form factor

2U rack mount

Processor

Intel® Xeon® processor E5-2600 v4 product family
Up to 4 x 2-socket servers; up to 22 cores per processor
Intel C612 chipset

Memory

16 DIMM slots for up to 512GB per node: 8GB/16GB/32GB DDR4 DIMM (up to 2400MT/s)

Primary storage

Maximum internal storage: 72TB SATA3 or 48TB NL-SAS

Drive bays and hard drives

24 x 2.5” or 12 x 3.5” hard drive options
24 x 2.5” hard drive option with variable drive allocation
Supports 7.2K, 10K, 15K RPM 2.5” and 3.5” SAS
Supports 7.2K RPM 2.5” and 3.5” SATA
2.5” SATA (7.2K): 250GB, 500GB, 1TB, 2TB
2.5” SAS (7.2K): 1TB, 2TB
2.5” SAS (10K): 600GB, 1.2TB
2.5” SAS (SAS12): 200GB, 400GB, 800GB
2.5” SATA SSD: 120GB, 160GB, 200GB, 400GB, 800GB, 960GB
2.5” SAS SSD: 200GB, 400GB, 800GB
3.5” SATA (7.2K): 1TB, 4TB, 6TB

Connectivity

Intel 82599ES 10GbE dual-port SFP+

USB ports

1 external rear port

I/O slots

1 x16 PCIe 3.0 half-height, half-length
1 x8 PCIe 3.0 mezzanine

I/O adapter options

1GbE:
Intel Powerville I350 dual-port 1GbE (PCIe adapter)
Intel Powerville I350 dual-port 1GbE PCIe (mezzanine)
10GbE: Mellanox ConnectX®-3 Pro dual-port 10GbE SVP+ (mezzanine)
10GbE:
Intel X540 Dual Port 10GbE 10Base-T (mezzanine)
Mellanox ConnectX-3 Pro dual-port 10GbE SFP+ (mezzanine)
InfiniBand:
Mellanox ConnectX-3 VPI single-port FDR/40GbE QSFP+ (PCIe adapter)
Mellanox ConnectX-3 VPI dual-port FDR/40GbE QSFP+ (PCIe adapter)
Mellanox ConnectX-3 VPI single-port FDR/40GbE QSFP+ (mezzanine)

Drive and RAID controllers

Intel C612 chipset SATA: AHCI SATA drives, RAID: 0, 1, 5, 10
PERC H330: SATA and SAS drives, x8 PCIe 3.0, RAID: 0, 1, 5, 10, 50 (optional)
PERC H730: SATA and SAS drives, x8 PCIe 3.0, RAID: 0, 1, 5, 10, 50, 60 (optional)
LSI® SAS 2008 Controller 6Gbs: mezzanine (optional), RAID: 0, 1, 10, JBOD (optional)
SATA DOM boot device (64Mb)
SAS SSD boot device (120Mb)

Power supplies

Dual hot-plug redundant high-efficiency 1400W or 1600W power supplies (200-220 VAC, 240 VDC)

Fans

Shared cooling with quick-disconnect 4x 60mm speed fans

Operating systems

Microsoft® Windows Server® 2012
Microsoft Windows Server 2012 R2
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux®

Hypervisors

Microsoft Windows Server 2012 (with Hyper-V® enabled)
VMware® vSphere® ESXi®

Systems management

Remote managment:
iDRAC8 with Lifecycle Controller
iDRAC8 Express (default)
iDRAC8 Enterprise (upgrade option)
Systems management: IPMI 2.0 compliant
Dell OpenManage Essentials
Dell OpenManage Mobile

Dimensions and weight

H: 8.68 cm (3.42 in), W: 44.8 cm (17.6 in), D: 79.0 cm (31.1 in)
Weight (maximum configuration) 41 kg (90.4 lbs)
Weight (empty) 15.1 kg (33.3 lbs)

Services (Availability varies by region. Please contact your sales representative for details.)

Data Center Consulting Services Rack Integration (U.S. only, not available in China)
Rack Design Verification Configuration Services/CFI Onsite
Online Self Dispatch
Basic Support
ProSupport Plus
ProSupport Flex for Data Center
4-Hour Support
Keep Your Hard Drive
Support Assist: Proactive Automated Support
Enterprise Wide Contract IT
Remote Advisory Service
Certified Data Destruction
Specialized Onsite Services

Close
Close

PowerEdge FC430

The FC430 is a compact quarter-width server block that combines powerful processors, great memory capacity and tremendous IO throughput. In its two-storage-drive configuration, it is well suited for mainstream enterprise workloads, such as web serving, dedicated hosting and lightweight virtualization and analytics. In its InfiniBand configuration, it is an excellent option for high-performance computing (HPC), high-frequency trading (HFT) and other workloads that require extra-low latency.

Tech Specs
Feature Description
Form factor Quarter-width – supports up to 8 sleds per PowerEdge FX2 enclosure
Processor Intel® Xeon® processor E5-2600 v4 product family
Memory Up to 256GB (8 DIMM slots): 4GB/8GB/16GB/32GB DDR4 up to 2400MT/s
FeaturePowerEdge FC430 technical specification

Form factor

Quarter-width – supports up to 8 sleds per PowerEdge FX2 enclosure

Processor

Intel® Xeon® processor E5-2600 v4 product family

Processor sockets

2

Cache:

2.5MB per core; core options: 4, 6, 8, 10, 12, 14, 18

Chipset

Intel C610 series

Dimensions

H: 4.27 cm (1.58 in), W: 10.27 cm (4.04 in), D: 45 cm (18.89 in)

Memory

Up to 256GB (8 DIMM slots): 4GB/8GB/16GB/32GB DDR4 up to 2400MT/s

I/O mezzanine cards

Access to 1 x PCIe 3.0 (x8) expansion slots

RAID controllers

Internal controllers: PERC S130 (SW RAID)

Primary storage

Hot-plug hard drive options: Up to 2 x 1.8” uSATA SSDs

Optional adapters

Optional NICs and HBAs

Power supplies

Chassis level – PowerEdge FX2 hot-plug PSU: 2000W, 1600W AC in 1+1 redundant or 2+0 non- redundant configurations

Video type

Matrox® G200 (integrated with iDRAC8)

Video memory

16MB shared with iDRAC8 application memory

Systems management

FX uses Chassis Management Controller (CMC) to manage all resources (server nodes and shared infrastructure) in a single web console. OpenManage portfolio for FX supports local and remote management, consistent with other PowerEdge products. Server nodes each contain proven iDRAC8 with Lifecycle Controller for agent-free, automated systems management

Supported hypervisors

Optional supported hypervisors: VMware XenServer™

Operating systems

Microsoft® Windows Server® 2008 R2
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Microsoft Windows® HPC Server 2008
Novell® SUSE® Linux Enterprise Server
Red Hat® Enterprise Linux
VMware® ESX®

Close

Object storage

2 x PowerVault MD3460 arrays

Close

MD3460

The MD3 dense SAS array has a 4U form factor that supports more drives than ever before within the MD3 product line, allowing you to save space, power and cooling while maintaining its ease-of-management. It uses 12Gb near-line SAS drives and DAS with dual active/active controllers, with a 60-drive capacity per enclosure. It can support 4GB or 8GB cache per controller.

Tech Specs
Feature Description
Drives 60 x 3.5" and 2.5" SAS, NL-SAS, SSD
Connection 12Gb SAS
Controller 16GB (8GB per controller)
MD3460 specifications

Drives

Mix and match up to 60 x 3.5” and 2.5” SAS, NL-SAS, SSD, SED

Drive capacities

3.5” NL-SAS 7.2K RPM: 500GB, 1TB*, 2TB*, 3TB*, 4TB*, 6TB, 8TB, 10TB
2.5” SAS 15K RPM: 146GB*, 300GB*, 600GB*
2.5” SAS 10K RPM: 146GB, 300GB*, 600GB*, 900GB*, 1.2TB*
2.5” NL-SAS 7.2K RPM: 500GB*, 1TB*, 2TB
SSD: 200GB, 400GB, 800GB (WI); 400GB, 800GB, 1.6TB (MU); 800GB, 1.6TB (RI) (available with 3.5” carriers)

Dimensions (height x width x depth)

17.78 cm (7.0”) x 48.26 cm (19”) x 82.55 cm (19”)

Maximum weight

105.24 kg (232 lb)

Expansion capabilities**

Up to 180 drives using the MD3060e

Management

2nd generation multi-protocol Modular Disk Storage Manager, Java based user interface
Multi-path graphical software provides failover management of redundant data paths between the server and storage array

Standard features

DDP***, thin provisioning, VAAI, vCenter Plug-in, VASA, SRA, HPT, SSD cache, SED, Microsoft Windows ODX

Optional features

Snapshot, VDC, HDD expansion option**

Controllers

Support up to 64 servers when configured with a Fibre Channel switch, available with 4GB cache controllers

Controller features

Each controller provides four 12Gbps SAS ports; a total of eight for dual controller models
Each controller contains 4GB or 8GB of battery-backed cache
Dual controllers operate in an active-active environment mirroring each other’s cache
Cache protection is provided via flash memory for permanent data protection
DDP*** eliminates the need for complex RAID management while optimizing data protection, and can be used with existing RAID configurations
Dual controllers are required for the MD3460 dense array
4GB and 8GB only available as dual controller option

Cache

Dual 4GB or 8GB cache
Up to 16GB cache (8GB per controller)

Server support

Dell PowerEdge™ servers

RAID

Support for RAID levels 0, 1, 10, 5, 6
Up to 180** physical disks per group in RAID 0, 10
Up to 30 physical disks per group in RAID 5, 6
Up to 512 virtual disks
DDP***

Operating system

Microsoft® Windows®, VMware®, Microsoft Hyper-V®, Red Hat® and SUSE®

Rack support

Dell ReadyRails™ II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racks.

Power

Wattage: AC – 1755W (dense arrays do not support DC power supplies)
Heat dissipation: 5988 BTU/hr
Voltage: 220V AC, auto ranging, 50Hz/60Hz
Frequency: 50/60Hz

Temperature

Operating: 10° to 35°C (50° to 95°F) with a maximum temperature gradation of 10°C per hour

Relative humidity

Operating: 20% to 80% (non-condensing) with a maximum humidity gradation of 10% per hour

Altitude

Operating: -30.5 m to 3000 m (-100 ft to 9,840 ft) NOTE: For altitudes above 2950 ft, the maximum operating temperature is derated 1.8°F/1000 ft

*Self-encrypting drives (SED) available
**Expansion beyond 120 drives is based on the purchase of a premium feature for additional drives
***MD34x0 arrays are limited to a maximum of 20 DDPs per array
Close
Close

Software

  • Red Hat Enterprise Linux
  • Bright Cluster Manager
  • Lab7 BioBuilds™ package – open source software pack of bundled genomic specific libraries
  • Genome Analysis Toolkit (GATK) from Broad Institute for genome testing
  • Benchmarking for molecular dynamic and Cryo-EM workloads
Close

Services and Financing

Dell EMC Professional Services

  • Dell EMC ProSupport
  • Remote HPC Cluster Management
  • Dell ProDeploy
  • Rack Integration, Data Center Deployment and HPC Cloud Bursting

Dell EMC Financial Services

  • Leasing and financing solutions are available throughout the U.S., Canada and Europe.
  • Dell EMC Financial Services can finance the total technology solution.
  • Efficient electronic quoting and online contracts offer the best customer experience.

Would You Like More Information?

Click the envelope icon at any time to use our contact form to have a Dell EMC representative get in touch with you, or click Contact Me now.

Contact Me No Thanks